540 Lone Oak Rd - Septic Maintenance 05/11/2022
www.pca.state.mn.us • 651-296-6300 • 800-657-3864 • Use your preferred relay service • Available in alternative formats
wq-wwists4-38 • 10/12/18 Page 1 of 3
Sewage tank
maintenance reporting form
Subsurface Sewage
Treatment Systems (SSTS) Program
Purpose: Management and maintenance of Subsurface Sewage Treatment Systems (SSTS) are important to ensure resource
protection and long-term and cost-effective sewage treatment. Completion of this form complies with the sewage tank maintenance
requirements under Minn. R. 7080.2450 and 7082.0600. This form may be used to certify the compliance status of the sewage tank
components of the SSTS. This form is not a complete SSTS inspection report and may only certify sewage tank compliance
status when entirely completed and signed on page 3 by a qualified professional.
Instructions: A copy of this information must be submitted to the system owner within 30 days of the maintenance date and be maintained
by the licensed SSTS maintainer business for a period of five (5) years from the maintenance date. Maintenance reporting to the local unit of
government may be required by local ordinance. Check with your local SSTS program for maintenance reporting protocol.
Secure maintenance hole covers
All maintenance hole covers must be returned to service in a sound and durable condition and be capable of withstanding
the anticipated load.
Covers must be re-secured in accordance with Minn. R. 7080.2450, subp. 3, Items C or D:
a) Covers installed under local ordinances adopted after February 4, 2008 must be locked, bolted or screwed or must be 95
pounds in weight. They must be made of material suitable for outdoor use, resistant to ultraviolet degradation and leaks, and
not susceptible to being slid or flipped. They must have a label warning of hazardous conditions inside the tank. All screw
openings must be refastened.
b) Covers installed under local ordinances adopted before February 4, 2008 must either be buried with at least 12 inches of
soil cover or be secured according to the local ordinance in effect before February 4, 2008.
c) Covers must meet item ‘a’ above when raised to the ground surface or less than 12 inches from the ground surface.
Reporting information
Date of maintenance (mm/dd/yyyy): Reason for maintenance:
Property address: Parcel ID:
City: State: Zip code:
Property owner’s name:
Property-owner’s address if different:
City: State: Zip code:
Phone number: Email address:
1. Did you measure the accumulation of scum and sludge? Yes No (tank(s) pumped without measuring)
2. Access used to remove septage: Maintenance hole Other (Unless a holding tank, go to #4 below)
3. If the maintenance hole was used, were all covers secured in place? Yes No If no, please explain below:
4. If the owner refuses to allow a Subsurface Sewage Treatment System (SSTS) to be pumped through the maintenance
hole, have them complete and sign the following statement.
I, , refuse to allow the removal of the solids and liquids through the maintenance
(Print owner’s name)
hole. I understand that removal of solids and liquids through other access points is not considered a compliant method of
solids removal and does not fulfill the solids removal requirements of Minn. R. 7080.2450 and 7082.0600.
Owner’s signature: Date (mm/dd/yyyy):
Tank (check if present) Scum Sludge Operating depth Percent full
Septic/holding tank #1
Septic/holding tank #2
Pretreatment tank
Pump tank
Routine
MN
5/11/2022
540 Lone Oak Rd
Jeremy Illg
Eagan 55121
Pumped Through Pipe
www.pca.state.mn.us • 651-296-6300 • 800-657-3864 • Use your preferred relay service • Available in alternative formats
wq-wwists4-38 • 10/12/18 Page 2 of 3
Property address: Parcel ID:
City: State: Zip code:
5. Is the tank designed as a leaky tank? (Example: seepage pit, cesspool, drywell, leaching pit)
Tank #1: Yes No Verification method used:
Tank #2: Yes No Verification method used:
6. Is there evidence of the following?
Tank (check if present)
Tank leaks below the
designed operating depth
Tank leaks above the
designed operating depth
Maintenance hole cover is
damaged, cracked, unsecured, or
appears to be structurally unsound
Septic/holding Tank #1 Yes No Yes No Yes No
Septic/holding Tank #2 Yes No Yes No Yes No
Pretreatment Tank Yes No Yes No Yes No
Pump Tank Yes No Yes No Yes No
Describe detail for any “Yes”
7. How many gallons of septage were removed?
Tank #1: Tank #2: Pretreatment Tank: Pump Tank:
8. Where was the septage taken? Wastewater treatment facility Land application Other
Explanation (Facility name/Site #):
9. Did you identify any operational issues or unsafe conditions while assessing the sewage tanks in this system?
Yes No If yes, identify tank and explain:
Evidence of non-domestic waste Baffle(s) condition Effluent screen condition
Maintenance hole and extensions condition Other conditions (e.g. structural integrity of tank or lid, electrical hazard, etc.)
Explanation:
10. List any troubleshooting and minor repairs completed or declined by owner:
Troubleshooting and repairs conducted: Repairs declined by owner:
Additional comments or suggestions for owner’s consideration:
Pumping record
I personally conducted the work described above on behalf of a Minnesota-licensed SSTS Maintenance Business, in compliance
with Minnesota Rules Chapters 7080 – 7083:
As a noncertified individual who has received proper training, daily work review, and periodic observation, or
As a designated certified individual of the business listed below.
Company information Employee information
Company name: Print name:
Business license number: Certification number: (if applicable):
Email: Phone number:
Employee’s signature: Date (mm/dd/yyyy):
Empire MCES WWTP
Schlomka Services
2989
Office@Schlomkaservices.com 651-459-3718
10/7/2024
540 Lone Oak Rd
Eagan MN 55121
* This was pumped in 2022 and the city had no record. This report is being done in 2024 with the notes on file to the best that can be.
300
Miah Janisch
Miah Janisch